Weld And Braze


Company name: Weld And Braze
Country: South Africa
Region: Gauteng
City: Bryanston
Address: PO Box 71855, Bryanston 2021
Phone: 27824901080
Phone: 27824908000
Fax: 0866011888
Site: www.weldnbraze.com
On this company found complaints: 0

Description of the company

Weld And Braze
PO Box 71855, Bryanston 2021, Bryanston, Gauteng, South Africa 27824901080, 27824908000
www.weldnbraze.com

Weld And Braze is Bryanston-based company (Gauteng, South Africa) with a phone number 27824901080 and categorized under Engineering. Our data show that the company is located at the address: PO Box 71855, Bryanston 2021. The company has a web site: www.weldnbraze.com. Spot Welding Machines. . The foot operated “Series to 90” spot welding machine is our standard medium to high duty foot operated spot welding machine. This type of machine is common and used throughout the fabrication industry. With its adjustable lower arm height & depth and the ability to swing the arm out of parallel to the upper arm the machine becomes very flexible. . The machine is used in the Automotive, general and white goods industry. Although the machine is not as fast as an air machine the advantage of using this machine is that the welding heads can be brought onto the job and aligned before final welding takes place. This is an aid where welds are in hard to get at or tricky places. . A laser cut front main “U” channel support, onto which all the component parts, firing systems, transformer and arm supports are fitted, gives the machine strength & ease of maintenance. The cover/door assy is separate and can be removed. . The machine uses a foot pedal/rocker arm with adjustable compression springs to achieve tip pressure. The machine is fitted standard with our Minipak timer control system and uses thyristor transformer switching. . The machine can be fitted with 35kva or 50kva water cooled fully encapsulated transformers. Tips and 25mmdia tip holders are water cooled, the arms are 50mmdia brass.. The machine is a general purpose spot welder. The machine will weld mild steel and stainless steel components, flat sheet metal or wire/round bar.. The timer system is supplied standard with a pulsation setting that allows for the welding of galvanized steel products.. . Company was established in 1998. Employs a staff of approximately 11 to 15. Contact Person: Don.

Unfortunately сompany staff has not yet provided of company's activities, mission and detailed description.